PINSA self adhesive pins
These self adhesive pins are suitable for fastening insulation blankets to square or rectangular air ducts.
The PINSA has been manufactured out of galvanized steel. The PINSA consists of a pin and a foot. The foot has been provided with a synthetic rubber tack coat. Clips are automatically delivered with the pins. The clip is going to be fastened to the PINSA after attaching the installation blanket. In consequence of this the blanket will stay in the correct position. Extra clips (PINSACLIP) are available as well.
safety
Protective caps (PINSACAP) for attaching round the pin are available to the pins. (the protective caps must be ordered separately). The use of PINSACAP is always recommended where people can be injured by projecting pins.
fastening
The best result will be achieved on a dry, fat-free and dust-free surface.
|
Specifications |
|
|---|---|
| material pin and base: | galvanized steel |
| adhesive layer: | synthetic rubber |
| temperature range: | -40 °C to 80 °C |
peak temperature: |
100 °C for a short period of time |
| length pin: | 19 - 165 mm |
| dimension base: | 50 x 50 mm |
| number per m² | 10 - 12 pieces |
|
Specifications PINSA CLIP |
|
|---|---|
| material: | galvanized steel |
|
Specifications PINSA CAP |
|
|---|---|
| material: | nylon |
|
Technical specifications |
|
|---|---|
Dutch specification |
|
German specification |
|
English specification |
|
Product images
|
|
|---|---|
|
Certificates |
||
|---|---|---|
not available |
 |
 |
 |
 |
|---|---|---|---|
| 19 mm | PINSA019 | 500 | 112 |
| 25 mm | PINSA025 | 500 | 112 |
| 32 mm | PINSA032 | 500 | 96 |
| 42 mm | PINSA042 | 500 | 96 |
| 51 mm | PINSA051 | 500 | 96 |
| 63 mm | PINSA063 | 500 | 96 |
| 76 mm | PINSA076 | 500 | 63 |
| 105 mm | PINSA105 | 500 | 45 |
| 165 mm | PINSA165 | 250 | 45 |
|
|
|
|
|---|---|---|---|
| PINSA clip | PINSACLIP | 1000 | 96 |
| PINSA cap | PINSACAP | 1000 | 96 |